Based in Yorkshire

07432 765165andydelstone@gmail.com
- 

AboutServices

Areas

Our WorkReviewsContact07432 765165Free site survey 

Home /Services /Traditional MasonryTraditional Masonry · Based in Yorkshire

# Traditional stonemasonry by a Yorkshire craftsman
Bespoke stonework, architectural dressings and traditional stone construction, built with methods that respect the material, so new work sits naturally beside the old.

Book a free site survey

4 decades

Stonemasonry experience

£10m

Public liability insurance

Guaranteed

All installation work

Free

Site surveys before formal quotes

The service

## Traditional Masonry, explained
Explore our stonework project photographs or arrange a free traditional masonry site survey with Delaney Contracts Ltd to discuss your property.

### What it is
Traditional masonry is stone construction and dressing using established methods: walls, gate piers, arches, dressings and features built in natural stone with suitable mortars and careful jointing.

### Who it is for
Owners of period properties and new homes built in a traditional style, and contractors who need skilled masonry on a prestige project.

### When it is needed
When building new stone walls or features, extending a stone house, rebuilding failed stonework, or adding architectural detail that has to look authentic.

### Why a specialist matters
Traditional stonework depends on understanding the stone. Different stones are handled very differently, and the wrong mortar or method can harm both new and existing work. Four decades of experience shows in the finish.

Project footage

## Stonework in action
Stone installation in action

The cost of getting it wrong

## The wrong methods damage good stone
Traditional buildings were built to breathe. Modern shortcuts often trap moisture and accelerate decay.

### Issues to consider before work begins
Repointing or rebuilding with hard cement mortars.
- Using whatever stone is cheapest instead of matching the original.
- Laying stone against its natural bed.
- Hiring a general builder for specialist stonework.

### Hard mortar damage
Cement-rich mortar is harder than many stones. Water and salts move into the stone instead of the joint, causing faces to spall.

### Work that looks new for the wrong reasons
Poor coursing, wrong tooling or mismatched stone makes new work stand out against the original.

### Structural weakness
Walls and piers built without proper bonding and through-stones can bulge, crack or collapse.

### Loss of character
Once original stone is damaged or replaced badly, the character of a period property is hard to recover.

Our process

## How the work is carried out
Drawings, sketches and photographs start the discussion. Andrew inspects the site before a formal quotation. Site surveys are free; lead times and job lengths depend on project scope.

- 01

### Photos and drawings
Send photographs, sketches or drawings of the work you have in mind.

- 02

### Free site survey
Andrew Delaney visits the site in person to see the building, the existing stone and the access. He doesn’t quote from 2D drawings alone, because drawings rarely tell the whole story.

- 03

### Stone and method
We agree the stone, mortar, tooling and coursing to suit the building.

- 04

### Building the work
Stone is dressed, laid on its natural bed and bonded properly, with joints finished to suit.

- 05

### Completion and guarantee
Work cleaned down and checked with you. All installation work is guaranteed.

What you gain

## The outcome, in practical terms

### Authentic appearance
Stone, tooling and coursing chosen so new work looks at home beside the old.

### Longevity
Mortar and bedding are selected to suit the stone and the building; service life depends on conditions and care.

### Protects existing stone
Sympathetic methods avoid damaging the original fabric of the building.

### Craft experience
Four decades of working with Yorkshire stone, Cadeby stone, limestone and more.

### Accountability
Andrew surveys the work himself and stands behind it.

### Insured and guaranteed
£10 million public liability insurance and guaranteed installation work.

In detail

## Traditional masonry in practice
Traditional masonry covers stone construction, dressings and architectural features.

### Walls, piers and gateways
Boundary walls, gate piers with caps, and gateway features in natural stone. Materials and details are selected to suit the building.

### Architectural dressings
Plinth courses, cornices, string courses, quoins and surrounds that give a building its architectural character, including Cadeby stone cornices.

### Mortars
We choose mortars that suit the stone, typically softer and more breathable than the stone itself on traditional buildings, so moisture leaves through the joints.

### Matching existing stone
On extensions and repairs we match stone type, colour, finish and coursing, and can use mineral stone tinting where small colour differences remain.

### Homes and commercial sites
For homeowners, Andrew deals with you directly. For contractors, we deliver the masonry package as a specialist on site.

Guide

## Traditional masonry: why method matters as much as stone

### Stone is not all the same
In Andrew’s experience, every stone is handled differently. A hard Yorkshire sandstone, a fine Cadeby magnesian limestone and a softer oolitic limestone each cut, bed and weather in their own way. Choosing the right tooling, the right mortar and the right orientation for each is what separates good masonry from work that looks tired within a few years.

### Lay stone on its natural bed
Sedimentary stone forms in layers. Laid with those layers horizontal, as it was in the quarry, it resists weather well. Laid on edge, the layers can open up and flake away. It is a basic principle of masonry that is often ignored by general builders, and one of the most common causes of premature decay.

### Let the wall breathe
Traditional solid walls manage moisture by letting it evaporate, mainly through the joints. If those joints are filled with a mortar harder and less permeable than the stone, moisture is forced through the stone instead, carrying salts that damage the face. Choosing a mortar that is weaker and more breathable than the stone protects the building.

### Match the old when extending
An extension to a stone house should look as though it belongs. That means matching the stone, the course heights, the tooling and the joint finish, not just the colour. Where new stone is a shade brighter than old, mineral tinting can help it settle in immediately rather than waiting years.

### Build it properly from the start
Walls and piers need bonding, through-stones and suitable foundations. Gate piers need caps that throw water clear and enough mass to carry gates without movement. Service life depends on materials, structural design, exposure and maintenance.

### Work with someone accountable
Andrew inspects the site before a formal quotation. All installation work has an informal workmanship guarantee; no written warranty is issued.

### Tooling and finishes
The surface finish of stone says a great deal about a building. Pitched, rock-faced, tooled, rubbed and sawn finishes all have their place, and many period buildings combine several. Matching the tooling of original dressings, or choosing the right finish for new work, is a large part of making masonry look authentic. It is the sort of detail an experienced mason notices and a general builder often overlooks.

### Repairs and rebuilding
Not every job is new work. Bulging walls, failed piers, eroded copings and decayed dressings often need taking down and rebuilding, reusing sound original stone where possible and introducing matching new stone where needed. The aim is a repair that is structurally sound and visually sympathetic, so the building keeps its character.

### Choosing who to trust with your stone
Discuss experience with your particular stone, the survey process, insurance and guarantee details before instructing work. Andrew Delaney has four decades of trade experience, and Delaney Contracts carries £10 million public liability insurance. All installation work has an informal workmanship guarantee; no written warranty is issued.

### Working across Yorkshire and beyond
Based in Yorkshire, we serve Yorkshire, Cheshire, Lancashire, Nottinghamshire, Surrey, Kent, London, Berkshire, Hertfordshire, Rotherham, Sheffield, Doncaster, Barnsley, Wakefield, Leeds, Harrogate, Ilkley, York, Chesterfield &amp; Peak District, Wentworth, Bawtry, Dore, Fulwood. Drawings, sketches and photographs start the discussion. Andrew inspects the site before a formal quotation. Site surveys are free; lead times and job lengths depend on project scope.

### What to send before the survey
Photographs of the existing stonework, close-ups of any damage, and drawings or sketches of new work help Andrew understand the job before he arrives. The site visit then confirms the stone, the method and the scope, so the quotation reflects the real building.

Book a free site survey

Questions

## Traditional Masonry: frequently asked questions

### How much does traditional stonework cost?
+It depends on the stone, the scale and the detail. Andrew quotes after a free site survey.

### Can you match my existing stone?
+We source stone to suit what’s there and match tooling and coursing. Mineral tinting can blend small differences.

### How long will the work take?
+That depends on scope. Andrew will give a realistic programme after the survey.

### Do you use lime mortar?
+We choose mortar to suit the stone and the building, including softer breathable mortars on traditional work.

### Is the work guaranteed?
+All installation work has an informal workmanship guarantee; no written warranty is issued. We carry £10 million public liability insurance.

### Do you work on period properties?
+Yes. Sympathetic treatment of stone on high-value buildings is central to how we work.

### Which areas do you cover?
+Based in Yorkshire, we serve Yorkshire, Cheshire, Lancashire, Nottinghamshire, Surrey, Kent, London, Berkshire, Hertfordshire, Rotherham, Sheffield, Doncaster, Barnsley, Wakefield, Leeds, Harrogate, Ilkley, York, Chesterfield &amp; Peak District, Wentworth, Bawtry, Dore, Fulwood.

##  Related services

- Stone Cladding→
- Stone &amp; Cast Stone Installation→
- DOFF Steam Cleaning→

##  Where we carry out traditional masonry
Based in Yorkshire and working across Yorkshire, Cheshire, Lancashire, Nottinghamshire, Surrey, Kent, London, Berkshire, Hertfordshire, Rotherham, Sheffield, Doncaster, Barnsley, Wakefield, Leeds, Harrogate, Ilkley, York, Chesterfield &amp; Peak District, Wentworth, Bawtry, Dore and Fulwood.

YorkshireCheshireLancashireNottinghamshireSurreyKentLondonBerkshireHertfordshireRotherhamSheffieldDoncasterBarnsleyWakefieldLeedsHarrogateIlkleyYorkChesterfield &amp; Peak DistrictWentworthBawtryDoreFulwood

## Stonework that looks as if it has always been there
Send photos of your project and book a free site survey with Andrew.

 £10m public liability · installation work guaranteed

Book a free site survey07432 765165

The UK’s leading independent portico installation company. Architectural stonemasonry, stone supply and specialist masonry care. Based in Yorkshire.

Contact

07432 765165andydelstone@gmail.comInstagram

## Areas we cover
YorkshireCheshireLancashireNottinghamshireSurreyKentLondonBerkshireHertfordshireRotherhamSheffieldDoncasterBarnsleyWakefieldLeedsHarrogateIlkleyYorkChesterfield &amp; Peak DistrictWentworthBawtryDoreFulwood

© 2026 Delaney Contracts LimitedStonemasonry servicesAreas we coverAbout Andrew DelaneyStonework galleryClient reviewsFree site surveyPrivacyTermsCookiesCookie settings

07432 765165Free site survey