Based in Yorkshire

07432 765165andydelstone@gmail.com
- 

AboutServices

Areas

Our WorkReviewsContact07432 765165Free site survey 

Home /Services /Stone TintingStone Tinting · Based in Yorkshire

# Stone tinting specialists in Yorkshire
Breathable mineral tints that even out colour differences between stone batches, or bring cast stone into line with natural stone, so the building looks as though it was built in one go.

Book a free site survey

4 decades

Stonemasonry experience

£10m

Public liability insurance

Guaranteed

All installation work

Free

Site surveys before formal quotes

The service

## Stone Tinting, explained
Explore our stonework project photographs or arrange a free stone tinting site survey with Delaney Contracts Ltd to discuss your property.

### What it is
Stone tinting uses breathable mineral paint tints to adjust the colour of stone or masonry. It blends different batches, or matches artificial and cast stone to natural stone, without coating over the texture.

### Who it is for
Homeowners with visible colour differences after building work, and contractors who need a new extension or repair to match existing stone.

### When it is needed
After an extension, repair or replacement where new stone doesn’t match, when cast stone batches arrive in different shades, or after cleaning reveals uneven colour.

### Why a specialist matters
Tinting needs a mason’s eye for colour and an understanding of how stone weathers. The wrong product or a heavy hand looks painted and can trap moisture.

Stone tinting

## Before and after
BeforeAfter

BeforeAfter

BeforeAfter

### The finished stonework

The cost of getting it wrong

## Colour differences don’t fade away quickly
New stone and mismatched batches can leave visible colour differences across a building.

### Issues to consider before work begins
Waiting years for new stone to ‘weather in’ when it may never match.
- Using ordinary masonry paint on natural stone.
- Replacing stone that could have been tinted.
- Applying tint without testing on the actual stone first.

### Patchy elevations
Bands or blocks of different colour draw the eye straight to the repair or extension.

### Painted look
Non-breathable paints or heavy application hide the stone’s texture and look artificial.

### Trapped moisture
Coatings that don’t breathe can trap water in stone, leading to damage.

### Expensive replacement
Taking out and replacing mismatched stone is costly and disruptive.

Our process

## How the work is carried out
Drawings, sketches and photographs start the discussion. Andrew inspects the site before a formal quotation. Site surveys are free; lead times and job lengths depend on project scope.

- 01

### Send photographs
Show us the colour differences you want to blend.

- 02

### Free site survey
Andrew Delaney visits the site in person to see the building, the stone and the access. He doesn’t quote from photos or drawings alone, because they rarely tell the whole story.

- 03

### Colour matching
Tints are mixed to suit the stone, and tested to check the match in daylight.

- 04

### Application
Breathable mineral tints applied carefully to blend the stone while keeping its texture.

- 05

### Review
The result is checked with you across the elevation.

What you gain

## The outcome, in practical terms

### Blended appearance
New and old stone, or different batches, read as one.

### Breathable
Mineral tints let stone breathe, unlike many paints.

### Keeps texture
The natural grain and surface of the stone remain visible.

### Alternative to replacement
Tinting may be an option for sound stone; suitability and cost depend on the project.

### Colour assessment
Discuss the colour differences and achievable result during the survey.

### Mason’s judgement
Advice from Andrew Delaney, with four decades’ trade experience.

In detail

## Where stone tinting is used
Tinting solves a range of colour problems on stone buildings.

### Cast stone batches
Cast stone can vary in colour between batches or deliveries. Tinting blends units so balustrades, surrounds and copings match.

### Cast stone with natural stone
Where cast or artificial stone sits beside natural stone, tinting brings them closer together in tone.

### Extensions and repairs
New stone next to weathered original stone can be tinted so the extension or repair blends in.

### After cleaning
Cleaning sometimes reveals uneven colour. Tinting can even this out, often combined with DOFF steam cleaning.

### Homes and commercial buildings
We tint for private homeowners and for main contractors finishing a project.

Guide

## Stone tinting explained: when it works and how it’s done

### Why colour differences happen
Cast stone is made in batches, and pigments and aggregates vary slightly from one to the next. Natural stone varies by quarry and bed. New stone set beside old, weathered stone looks bright by comparison. Any of these can leave an elevation looking patched.

### Why not wait for it to weather?
Sometimes new stone does settle down. Often it doesn’t, or takes many years, and different materials weather at different rates so the gap can persist or even widen. Tinting can help blend differences; the achievable result depends on the materials and condition.

### Why mineral tints
Ordinary masonry paint forms a film that hides texture and can trap moisture inside the stone. Breathable mineral tints are designed to colour the surface while letting moisture escape, so the stone continues to behave as stone and still looks like stone.

### Matching takes judgement
Stone isn’t one flat colour. A good match picks up the variation within the stone and the way it looks in different light. Tints are mixed and tested on the actual stone and checked in daylight before the work proceeds.

### Light touch, not a coat of paint
The aim is to blend, not to cover. Tint is applied so the grain and texture of the stone remain visible and the eye no longer picks out the difference between units.

### Combine with cleaning and repairs
Tinting often follows DOFF steam cleaning, extension work or replacement of damaged units. Because we carry out all of these, the whole job can be planned together so the finished elevation looks consistent.

### Testing before committing
Before any elevation is tinted, test areas are prepared on the actual stone so you can see the result in daylight and from normal viewing distances. Colour can look very different close up and from the drive, so we check both. Only once you are happy with the match does the main work proceed.

### When tinting is not the answer
Tinting blends colour; it does not repair damaged or decaying stone. If units are cracked, spalling or structurally unsound, they should be repaired or replaced first. Andrew will tell you during the survey whether tinting alone will solve the problem, or whether masonry work is needed too.

### Tinting on homes and commercial projects
Homeowners usually come to us when an extension or repair stands out against the original house. Contractors often call us when cast stone deliveries arrive in slightly different shades and the client has noticed. In both cases, tinting may help blend colour differences where the stone is sound; suitability and costs depend on the project.

### Choosing who to trust with your stone
Discuss experience with your particular stone, the survey process, insurance and guarantee details before instructing work. Andrew Delaney has four decades of trade experience, and Delaney Contracts carries £10 million public liability insurance. All installation work has an informal workmanship guarantee; no written warranty is issued.

### Working across Yorkshire and beyond
Based in Yorkshire, we serve Yorkshire, Cheshire, Lancashire, Nottinghamshire, Surrey, Kent, London, Berkshire, Hertfordshire, Rotherham, Sheffield, Doncaster, Barnsley, Wakefield, Leeds, Harrogate, Ilkley, York, Chesterfield &amp; Peak District, Wentworth, Bawtry, Dore, Fulwood. Drawings, sketches and photographs start the discussion. Andrew inspects the site before a formal quotation. Site surveys are free; lead times and job lengths depend on project scope.

### What to send before the survey
Photographs showing the colour differences, taken in daylight from both close up and a normal viewing distance, are the most useful thing you can send. Details of the stone or cast stone products used also help. Andrew then visits to assess the match in person before any test areas are prepared.

Book a free site survey

Questions

## Stone Tinting: frequently asked questions

### How much does stone tinting cost?
+It depends on the area and the level of colour difference. Andrew quotes after a free site survey.

### Will tinted stone look painted?
+Mineral tints are intended to blend colour while retaining visible texture. Appearance depends on the stone and application; discuss the expected result with Andrew.

### Is tint breathable?
+Yes. We use breathable mineral paint tints.

### Can cast stone be matched to natural stone?
+Mineral tinting can help blend colour differences between cast and natural stone. A perfect match is not guaranteed.

### How long does tinting take?
+It depends on the area. Andrew will advise after seeing the building.

### How long does the tint last?
+That depends on exposure and location. Andrew will discuss what to expect for your building.

### Which areas do you cover?
+Based in Yorkshire, we serve Yorkshire, Cheshire, Lancashire, Nottinghamshire, Surrey, Kent, London, Berkshire, Hertfordshire, Rotherham, Sheffield, Doncaster, Barnsley, Wakefield, Leeds, Harrogate, Ilkley, York, Chesterfield &amp; Peak District, Wentworth, Bawtry, Dore, Fulwood.

##  Related services

- DOFF Steam Cleaning→
- Stone &amp; Cast Stone Installation→
- Stone Cladding→

##  Where we carry out stone tinting
Based in Yorkshire and working across Yorkshire, Cheshire, Lancashire, Nottinghamshire, Surrey, Kent, London, Berkshire, Hertfordshire, Rotherham, Sheffield, Doncaster, Barnsley, Wakefield, Leeds, Harrogate, Ilkley, York, Chesterfield &amp; Peak District, Wentworth, Bawtry, Dore and Fulwood.

YorkshireCheshireLancashireNottinghamshireSurreyKentLondonBerkshireHertfordshireRotherhamSheffieldDoncasterBarnsleyWakefieldLeedsHarrogateIlkleyYorkChesterfield &amp; Peak DistrictWentworthBawtryDoreFulwood

## Make mismatched stone look like one building
Send photos of the colour difference and book a free site survey with Andrew.

 £10m public liability · installation work guaranteed

Book a free site survey07432 765165

The UK’s leading independent portico installation company. Architectural stonemasonry, stone supply and specialist masonry care. Based in Yorkshire.

Contact

07432 765165andydelstone@gmail.comInstagram

## Areas we cover
YorkshireCheshireLancashireNottinghamshireSurreyKentLondonBerkshireHertfordshireRotherhamSheffieldDoncasterBarnsleyWakefieldLeedsHarrogateIlkleyYorkChesterfield &amp; Peak DistrictWentworthBawtryDoreFulwood

© 2026 Delaney Contracts LimitedStonemasonry servicesAreas we coverAbout Andrew DelaneyStonework galleryClient reviewsFree site surveyPrivacyTermsCookiesCookie settings

07432 765165Free site survey